Configuring your machine for a wireless network (For
3
4
For example: |
|
|
Uses 5 text characters e.g. “Hello” (this is case sensitive) |
| |
Uses 10 digits of hexadecimal data e.g. “71f2234aba” |
| |
Uses 13 text characters e.g. |
| |
| “Wirelesscomms” (this is case sensitive) | 3 |
Uses 26 digits of hexadecimal data |
e.g.“71f2234ab56cd709e5412aa3ba”
This is supported for
Encryption key, WEP key, Passphrase.
For LEAP and
For example:
Network name:(SSID, ESSID)
HELLO
Communication Mode | Authentication method | Encryption mode | Network key |
Infrastructure | AES | 12345678 | |
|
|
|
|
b Plug the machine’s power cord into the AC power outlet. Turn on the machine’s power switch. c Press Menu on the control panel of the Brother machine.
d Press a or b to choose Network. Press OK.
Select ab or OK 7.Network
e Press a or b to choose WLAN. Press OK.
Network 2.WLAN
f Press a or b to choose Setup Wizard. Press OK.
WLAN
2.Setup Wizard
g If the following message appears, press 1 to choose On. The wired network interface will become inactive with this setting.
WLAN Enable ? 1.On 2.Off
35