Configuring your machine for a wireless network (For
Configure your machine for a wireless network
IMPORTANT
•If you are going to connect your Brother machine to your network, we recommend that you contact your system administrator prior to installation. You must know your wireless network settings before you
proceed with this installation. | 3 |
• If you have previously configured the wireless settings of the machine, you must reset the network LAN settings before you can configure the wireless settings again. Press Menu, 7, 0 for Network Reset, press 1 for Reset and then choose 1 for Yes to accept the change. The machine will restart automatically.
Using the Brother installer application on the
For installation, see Wireless configuration for Windows® using the Brother installer application (For
Using the WPS or AOSS control panel menu to configure your machine for a wireless network (Automatic Wireless mode)
If your wireless access point/router supports either
1Push Button Configuration
Note
Routers or access points that support
a Plug the machine’s power cord into the AC power outlet. Turn on the machine’s power switch.
31