Configuring your network printer
11
2
cDouble-click the unconfigured device.
Note
• If the print server is set to its factory default settings without using a DHCP/BOOTP/RARP server, the
device will appear as Unconfigured in the BRAdmin Light util ity screen.
• You can find the node name and Ethernet address by printing t he Network Configuration Li st. See Printing
the Network Configuration Liston page 25 for information on how to print the Network Configuration List
on your print server.
dChoose Static from Boot Method. Enter the IPaddress, Subnet Mask and Gatewa y (if needed) of
your print server.
eClick OK.
fWith the correctly programmed IP address, you will see the Brother print server in the device list.
Windows®Macintosh®
Windows®Macintosh®