Chapter 4
d
e Swipe up or down, or press a or b to display Setup Receive.
f
g Swipe up or down, or press a or b to display Memory Receive.
h
i Swipe up or down, or press a or b to display Paging.
j
k Enter your cell phone or pager number followed by # # (up to 20 digits). Press OK.
Do not include the area code if it is the same as that of your machine.
For example, press:
1 8 0 0 5 5 5 1 2 3 4 # #.l Do one of the following:
If you are programming your cell phone number and do not need to enter a PIN, press OK.
If your pager needs a PIN, enter the PIN, press #, press Pause, and then enter your fax number followed by
# #.
Press OK.
For example, press:
1 2 3 4 5 # Pause 1 8 0 0 5 5 5 6 7 8 9 # #If you do not need a PIN, press:
Pause, and then enter your fax number followed by # #. Press OK. For example, press:
Pause 1 8 0 0 5 5 5 6 7 8 9 # #m Press 
.
NOTE
You cannot change a pager number or PIN remotely.
Fax Storage
If you choose Fax Storage, your machine stores received faxes in the memory. You will be able to retrieve fax messages from another location using the remote retrieval commands.
If you have turned on Fax Storage, a backup copy will automatically be printed at the machine.
a Press 
.
b
c Swipe up or down, or press a or b to display Fax.
d
e Swipe up or down, or press a or b to display Setup Receive.
f
g Swipe up or down, or press a or b to display Memory Receive.
h
i Swipe up or down, or press a or b to display Fax Storage.
j Press Fax Storage.
k Press 
.
NOTE
Color faxes cannot be stored in the memory. When you receive a color fax, your machine prints it.
22