PhotoCapture Center™: Printing photos from a memory card or USB Flash memory drive
j Adjust the red frame around your photo. The part inside of the red frame will be printed.
Press + or - to enlarge or reduce the frame size.
Press a, b, d or c to move the position of the frame.
Press 
to rotate the frame.
Press OK when you have finished adjusting the frame setting. Press OK to confirm.
NOTE
If your photo is very small or has irregular proportions, you may not be able to crop or enhance the photo. The Touchscreen will display Image Too Small or Image Too Long.
k Enter the number of copies you want, either by pressing + or - or using the dial pad on the Touchpanel.
Press OK.
l Do one of the following.
Press Print Settings to change the print settings. (See page 61.)
If you do not want to change any settings, press Start to print.
Slide Show
You can view all your photos on the Touchscreen using Slide Show. You can also choose a photo during the operation.
a
b Put the memory card or USB Flash memory drive in the correct slot.
c
d Swipe left or right to display Slide Show.
e Press Slide Show. Press OK.
f Do one of the following:
If you want to change the time to show each photo, press
Show Each Photo for. | 8 |
Swipe up or down, or press a or b to |
display 3Secs, 10Secs, 30Secs, 1Min or 5Mins, and then press the option you want to set.
If you want to change the effect, press Effect.
Press Slide In, Fade In, Zoom In or Off.
If you do not want to change the settings, press Start.
g Press 
to finish Slide Show.
59 