PhotoCapture Center™: Printing photos from a memory card or USB Flash memory drive
PhotoCaptureCenter™ print settings
You can change the print settings for the next print job.
These settings are temporary, and the machine returns to its default settings 1 minute after printing.
NOTE
You can save the print settings you use most often by setting them as the default settings. (See Setting your changes as the new default on page 66.)
i Swipe up or down, or press a or b to display Print Quality.
j Press Print Quality. k Press Normal or Photo.
l If you do not want to change additional
settings, press 
or OK. Press Start to print.
NOTE
If you choose Inkjet Paper in Paper Type, you can only choose Photo.
Print Quality
a
b Put the memory card or USB Flash memory drive in the correct slot.
c
d Swipe left or right to display View Photos.
e Press View Photos. Press OK.
f Swipe left or right, or press d or c to display each photo. When the photo you want is displayed, press it and then press OK.
g Press OK.
h Press Print Settings.
Paper options
Paper Type
a Open the media slot cover. | 8 |
b Put the memory card or USB Flash memory drive in the correct slot.
c
d Swipe left or right to display View Photos.
e Press View Photos. Press OK.
f Swipe left or right, or press d or c to display each photo. When the photo you want is displayed, press it and then press OK.
g h
i Swipe up or down, or press a or b to display Paper Type.
j
k Press Plain Paper, Inkjet Paper, Brother BP71 or Other Glossy.
61 