PhotoCapture Center™: Printing photos from a memory card or USB Flash memory drive
How to set a new default
You can save the Scan to Media settings (Scan Type, Resolution, File Type, Auto Crop and
Remove Background Color) you use most often by setting them as the default settings. These settings will stay until you change them again.
a
b Put the memory card or USB Flash memory drive in the correct slot.
c d
e Swipe up or down, or press a or b to display Scan Type, Resolution, File Type, Auto Crop or Remove Background Color, and then press the setting you want to change. Then press the option you want to set.
Repeat this step for each setting you want to change.
f After you are finished choosing your preferred settings, swipe up or down, or press a or b to display
Set New Default.
g
h The Touchscreen asks you to confirm the change to the new default settings. Press Yes to confirm.
i Press 
.
How to reset to the factory settings
You can restore all the Scan to Media settings (Scan Type, Resolution, File Type, Auto Crop and
Remove Background Color), that you have changed, to the factory settings.
a
b Put the memory card or USB Flash memory drive in the correct slot.
c d
e Swipe up or down, or press a or b to display Factory Reset.
f
g The Touchscreen asks you to confirm to 8 change back to the factory settings.
Press Yes to confirm.
h Press 
.
69 