
The quality of a fax can be improved by changing the fax resolution.
a Press (FAX).
b Press a or b to choose Fax Resolution.
c Press d or c to choose the resolution you want.
Press OK.
Note
You can choose four different resolution settings for black & white faxes and two for color faxes.
Black & White
Standard | Suitable for most typed |
| documents. |
Fine | Good for small print and |
| transmits a little slower than |
| Standard resolution. |
S.Fine | Good for small print or artwork |
| and transmits slower than Fine |
| resolution. |
Photo | Use when the document has |
| varying shades of gray or is a |
| photograph. Photo has the |
| slowest transmission. |
|
|
|
|
Color |
|
Standard | Suitable for most typed |
| documents. |
Fine | Use when the document is a |
| photograph. The transmission |
| time is slower than Standard |
| resolution. |
|
|
If you choose S.Fine or Photo and then use the Color Start key to send a fax, the machine will send the fax using the Fine setting.
Sending a fax
Setting your changes as the new default
You can save the fax settings for |
| |
Fax Resolution, Contrast, |
| |
Real Time TX and Glass ScanSize you |
| |
use most often by setting them as default. |
| |
These settings will stay until you change | 3 | |
them again. |
| |
|
| |
a Press | (FAX). |
|
b Press a or b to choose the setting you |
|
want to change, and then press d or c to choose your new option.
Press OK.
Repeat this step for each setting you want to change.
c After changing the last setting, press
aor b to choose Set New Default. Press OK.
d Press 1 to choose Yes. e Press Stop/Exit.
Restoring fax settings to the factory settingsYou can restore the fax settings Fax Resolution, Contrast,
Real Time TX, and Glass ScanSize, that you have changed, to the factory settings.
a Press (FAX).
b Press a or b to choose Factory Reset. Press OK.
c Press 1 to choose Yes. d Press Stop/Exit.
9