Chapter 8
EnhanceEnhance
a Make sure you have put the memory card or USB Flash memory drive in the proper slot.
Press (PHOTO CAPTURE).
b Press a or b to choose Enhance Photos. Press OK.
c Press d or c to choose your photo or picture.
Press OK.
d Press a or b to choose Enhance Skin. Press OK.
Note
You can also adjust the effect level manually, by pressing a or b.
e Press OK and enter the number of copies you want using the dial pad.
f Do one of the following:
Press OK and change the print settings. (See PhotoCapture Center® print settings on page 50.)
If you do not want to change any settings, press Color Start to print.
Enhance SceneryEnhance Scenery is best used for adjusting landscape photographs. It highlights green and blue areas in your photo, so that the landscape looks more sharp and vivid.
a Make sure you have put the memory card or USB Flash memory drive in the proper slot.
Press (PHOTO CAPTURE).
b Press a or b to choose Enhance Photos. Press OK.
c Press d or c to choose your photo or picture.
Press OK.
d Press a or b to choose Enhance Scenery. Press OK.
Note
You can also adjust the effect level manually, by pressing a or b.
e Press OK and enter the number of copies you want using the dial pad.
f Do one of the following:
Press OK and change the print settings. (See PhotoCapture Center® print settings on page 50.)
If you do not want to change any settings, press Color Start to print.
RemoveThe machine detects eyes in your photos and will attempt to remove
Note
There are some cases when
•When the face is too small in the image.
•When the face is turning too far up, down, left or right.
a Make sure you have put the memory card or USB Flash memory drive in the proper slot.
Press (PHOTO CAPTURE).
46