7 Making copies

Copy settings

You can change the copy settings temporarily for the next copy.

These settings are temporary, and the machine returns to its default settings

1 minute after copying, unless you have set the Mode Timer to 30 seconds or less. (See Mode Timer on page 5.)

To change a setting, press COPY and then press a or b to scroll through the copy settings. When the setting you want is highlighted, press OK.

When you are finished choosing settings, press Black Start or Color Start.

Note

You can save some of the settings that you use most often by setting them as default. These settings will stay until you change them again. (See Setting your changes as the new default on page 41.)

Stop copying

To stop copying, press Stop/Exit.

Changing copy quality

You can choose from a range of quality. The factory setting is Normal.

Fast

Fast copy speed and lowest amount of ink used. Use to save time printing documents to be proof-read, large documents or many copies.

Normal

Normal is the recommended mode for ordinary printouts. This produces good copy quality with good copy speed.

Best

 

7

Use Best mode to copy precise images

such as photographs. This provides the

 

highest resolution and slowest speed.

 

a Press

(COPY).

 

b Load your document.

c Enter the number of copies you want. d Press a or b to choose Quality.

e Press d or c to choose Fast, Normal or Best.

Press OK.

f If you do not want to change additional settings, press Black Start or

Color Start.

Enlarging or reducing the copied image

You can choose an enlargement or reduction ratio. If you choose Fit to Page, your machine will adjust the size automatically to the paper size you set.

35