Press d or c to choose On.
Using a scanned paper document as your watermark

a Press (COPY).

b Enter the number of copies you want.

c Press a or b to choose Watermark Copy. Press OK.

d

e Press a or b to choose Current Setting. Press OK.

f Press a or b to choose Scan. Press OK, and place the page that you want to use as a watermark on the scanner glass.

g Press Black Start or Color Start.

h Take out the watermark document you scanned and load the document you want to copy.

i Press d or c to change the Transparency of the watermark. Press OK.

j If you do not want to change any additional settings, press Black Start or Color Start.

Note

You cannot enlarge or reduce the scanned watermark.

Making copies

Setting your changes as the new default

You can save the copy settings for Quality, Enlarge/Reduce, Density,

Ink Save Mode and Page Layout that you use most often by setting them as the default settings. These settings will stay until you change them again.

a Press

(COPY).

 

b Press a or b and d or c to choose your

 

new setting.

 

 

Press OK.

 

 

Repeat this step for each setting you

 

want to change.

 

c After changing the last setting, press

7

a or b to choose Set New Default.

Press OK.

d Press 1 to choose Yes. e Press Stop/Exit.

Restoring all settings to the factory settings

You can restore the copy settings

Quality, Enlarge/Reduce, Density, Ink Save Mode, and Page Layout, that you have changed, to the factory settings.

a Press (COPY).

b Press a or b to choose Factory Reset. Press OK.

c Press 1 to choose Yes. d Press Stop/Exit.

41