Chapter 3

Canceling a Broadcast in progress

a Press .

b Do one of the following:

To cancel the entire broadcast, press

Entire Broadcast. Go to step c.

To cancel the current job, press the number being dialed on the Touchscreen. Go to step d.

To exit without canceling, press .

c When the Touchscreen asks if you want to cancel the entire broadcast, do one of the following:

Press Yes to confirm.

To exit without canceling, press No.

d Do one of the following:

To cancel the current job, press Yes.

To exit without canceling, press No.

Real Time Transmission

When you are sending a fax, the machine will scan the document into the memory before sending it. Then, as soon as the telephone line is free, the machine will start dialing and sending.

Sometimes, you may want to send an important document immediately, without waiting for memory transmission. You can do this by turning on Real Time TX.

a Load your document.

b (MFC-J650DW)

Press (Fax).

(MFC-J870DW and MFC-J875DW) Do one of the following:

When Fax Preview is set to Off,

press (Fax).

When Fax Preview is set to On, press (Fax) and

(Sending Faxes). c Press Options.

d Press a or b to display Real Time TX. e Press Real Time TX.

f Press On (or Off). g Press OK.

h Enter the fax number. i Press Fax Start.

NOTE

•If you are sending a color fax or if the memory is full and you are sending a black & white fax from the ADF, the machine will send the document in real time (even if

Real Time TX is set to Off).

•In Real Time Transmission, the automatic redial feature does not work when you are using the scanner glass.

16