Press Set New Default.
Press OK.
Press Print Settings.
Press View Photos.
Press Photo.
Press d or c to display View Photos.
Open the media slot cover.
Press d or c to display View Photos. Press View Photos.
Press Photo.
Open the media slot cover.

PhotoCapture Center™: Printing photos from a memory card or USB Flash drive

Print Date

You can print the date if it is already in the data on your photo. The date will be printed on the lower-right corner. If the data doesn’t have the date information, you cannot use this function.

a

b Put the memory card or USB Flash drive in the correct slot.

c d e

f Press d or c to display each photo. When the photo you want is displayed, press it, and then press OK.

g Press OK.

h Press Print Settings.

i Press a or b to display Print Date. j Press Print Date.

k Press On (or Off).

l If you do not want to change additional

settings, press or OK. Press Start to print.

NOTE

The DPOF setting on your camera must be turned off to use the Print Date feature.

Setting your changes as the new default

You can save the print settings you use most often—such as Print Quality,

Paper Type, Paper Size, Print Size,

Auto Correct 1, Brightness, Contrast, Color Enhance, Cropping, Borderless and Print Date—by setting them as the default settings. These settings will stay until you change them again.

1MFC-J870DW and MFC-J875DW only

a

b Put the memory card or USB Flash drive in the correct slot.

c

d

e8

f Press d or c to display each photo. When the photo you want is displayed, press it, and then press OK.

g h

i Press your new setting.

Repeat this step for each setting you want to change.

j After changing the last setting, press a or b to display Set New Default.

k

l The Touchscreen asks you to confirm the change to the new default settings. Press Yes to confirm.

m Press .

67