7 Making copies
Copy options
You can change the copy settings for the next copy.
These settings are temporary. The machine returns to its default settings 1 minute after copying.
Press Copy, and then press Options. Press
aor b to scroll through the copy settings. When the setting you want is displayed, press it and choose your preferred option.
When you have finished changing the options, press OK, and then press Black Start or Color Start.
NOTE
•You can save some of the settings you use most often by setting them as the default settings. These settings will stay until you change them again. (See Setting your changes as the new default
•You can save some of the options you use most often by setting them as a Shortcut. (See Saving copy options as a Shortcut on page 54.)
•The Ink Save Mode 1,
Thin Paper Copy 1, Book Copy 1 and Watermark Copy 1 features are supported by technology from Reallusion,
Inc.
1
Stop copying
To stop copying, press .
Improving copy quality
You can choose the copy quality. The factory setting is Normal.
NOTE
If you choose Normal or Fast, you can only choose Plain Paper in
Paper Type.
Normal
Normal is the recommended mode for ordinary printouts. This produces good copy quality with good copy speed.
Best
Use Best mode to copy precise images, such as photographs. This provides the highest resolution and slowest speed.
Fast
Fast copy speed and lowest amount of ink used. Use to save time printing documents to be
a
b Press (Copy).
c d e f g h
i If you do not want to change additional settings, press Black Start or Color Start.
42