|
|
|
|
|
|
|
|
| Wired Network |
| Macintosh |
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
For wired network interface users (Mac OS X 10.4.11, 10.5.x, 10.6.x) |
|
16 Before you install
Make sure your machine is connected to the power and your Macintosh is ON. You must be logged on with Administrator rights.
Note
•For Mac OS X 10.4.0 to 10.4.10 users, upgrade to Mac OS X 10.4.11 - 10.6.x.
•If you have previously set up your machine for a wireless network and then want to set it up on a wired network, you should check that the machine’s Network I/F is set to
Wired LAN. The wireless network interface will become inactive with this setting.
On your machine, press Menu. Press Network.
Press a or b to display Network I/F. Press Network I/F.
Press Wired LAN. Press Stop/Exit.
17 Connect the network cable
a Using both hands, use the plastic tabs on both sides of the machine to lift the scanner cover until it locks securely into the open position.
b You will find the LAN socket marked with a symbol inside the machine on the left as shown below. Remove the protective cap and connect the network cable to the LAN socket.
USB
24