For Wireless Network Users

j Enter the Network Key you wrote down in step 17-aon page 28 and then enter the key again in Confirm Network Key, then click Next.

Note

If your network is not configured for Authentication and Encryption, the following screen will appear. To continue configuration, click OK and go to k.

k Click Next. The settings will be sent to your machine.

Note

•The settings will remain unchanged if you click Cancel.

•If you want to manually enter the IP address settings of your machine, click Change IP Address and enter the necessary IP address settings for your network.

•If the wireless setup failure screen appears, click Retry and try starting from step h again.

l Disconnect the USB cable between the computer and the machine.

m Click Next to continue to install MFL-Pro Suite.

Wireless setup is now complete. A four level indicator at the upper right of your machine’s LCD will show the wireless signal strength of your access point/router.

To install MFL-Pro Suite, continue to step 20-eon page 38.

Now go to

Page 38

32