For Wireless Network Users

18 Manual configuration from the control panel(Windows® and Macintosh)

You must have the wireless settings you wrote down for your network in step 17-bon page 29 before you proceed.

a On your machine, press Menu. Press Network.

Press WLAN.

Press Setup Wizard.

When Switch Network interface to wireless? is displayed, press Yes to accept. This will start the wireless setup wizard.

To cancel, press No.

b The machine will search for available SSIDs. It will take several seconds to display a list of available SSIDs.

If a list of SSIDs is displayed, press a or b to choose the SSID you wrote down in step 17-bon page 29. Select the SSID you want to connect with.

If the wireless access point/router of the selected SSID supports WPS and the machine asks to use WPS, go to c.

If the machine asks you to enter a Network Key, go to d.

Otherwise, go to e.

Note

•If a list of SSIDs is not displayed, make sure your access point is on. Move your machine

closer to the access point and try starting from a again.

•If your access point is set to not broadcast the SSID, you will have to manually add the SSID name. For details, see the Network User’s Guide.

c Press Yes to connect your machine using WPS. (If you choose No to continue manual setting, go to d to enter a Network Key.)

When the LCD shows Start WPS, press the WPS button on your wireless access point/router, and then press Next to proceed. Go to e.

d Enter the Network Key you wrote down in step 17-bon page 29 using the Touchscreen.

The letters appear in this order: lower case and then upper case. Press to cycle between letters, numbers and special characters. (The characters available may differ depending on your country.) To move the cursor left or right, press d or c.

(For more information, see Entering Text for Wireless Settings on page 43.)

Press OK when you have entered all the characters, then press Yes to apply your settings.

e Your machine will now try to connect to your wireless network. It may take a few minutes.

f A connection result message appears for 60 seconds on the LCD and a wireless LAN report will automatically be printed.

If the connection failed, check the error code on the printed report and refer to Troubleshooting on page 35.

Wireless setup is now complete. A four level indicator at the upper right of your machine’s LCD will show the wireless signal strength of your access point/router.

To install MFL-Pro Suite, continue to step 19.For Windows® Users:

Now go to

Page 37

For Macintosh Users:

Now go to

Page 40

Network Wireless

33