For Network Users

Reset the network settings to factory default

To restore all network settings of the internal Print/Scan server to factory default, please follow the steps below.

a

b c d e f g

Make sure the machine is not operating, then disconnect all the cables from the machine (except the power cord).

Press Menu.

Press Network.

Press a or b to display Network Reset and press Network Reset.

Press Yes.

Hold down Yes for 2 seconds to confirm.

The machine will restart, re-connect cables once this is complete.

Entering Text for Wireless Settings

Up to four letters are assigned to each letter button on the Touchscreen. By pressing the correct button repeatedly, you can access the character you want.

Press to cycle between letters, numbers and special characters. (The characters available may differ depending on your country.)

Inserting spaces

To enter a space, press then press the space button or .

Making corrections

If you entered a character incorrectly and want to change it, press d or c to move the cursor to the incorrect character, press . Re-enter the correct character. You can also back up and insert a character.

Repeating characters

If you need to enter a character that is on the same button as the character before, press c to move the cursor to the right before you press the button again.

43