DOS
Setup
Printing
Difficulties
Windows®
Setup
Printing
Difficulties
DIFFICULTY | SUGGESTIONS |
I cannot print from | Check that the DOS application software interface |
my application | settings match those of your printer: for example, if |
software. | you are using a parallel printer cable, you would |
| probably set your DOS software printer port to |
| LPT1. Check for an error message on the LCD. |
| Note: Some DOS applications do not print correctly |
| through Windows® . Restart in DOS mode to avoid |
| conflicts with Windows® . |
The machine prints, | This is an indication that your application printer |
but it prints incorrect | emulation Prints setting and the machine’s printer |
information. | emulation do not match. Check your application |
Sometimes it prints a | software to make sure you selected the correct |
couple of characters | printer driver. The machine emulates HP LaserJet |
and then ejects the | IIP. Try setting the machine to HP emulation in |
pages, etc. | Remote Printer Console and then select the HP |
| LaserJet IIP printer in your application software. |
The machine prints | This is common problem first with database software |
the part of my | and Part of spreadsheet software when they are not |
document but does | correctly set up. The data has been sent to the printer |
not print the last page. | but the printer did not receive the Page Eject |
(The LCD shows | command. Press FF/Cont to eject the page. Then ask |
REMAINED DATA.) | your software supplier how to add a Page Eject (or |
| Form Feed) command to the end of your print job. |
How can I change | Use the Remote Printer Consol (RPC) program. |
the user settings or |
|
default settings on |
|
the machine? |
|
I cannot print from | Make sure the Windows® printer driver is installed |
my application | and you select it in your application software. |
software. |
|
8 - 2 | T R O U B L E S H O O T I N G W I N D O W S ® S O F T W A R E D I F F I C U L T I E S |
