2 2NC-2200w Wireless Setting

Setting up NC-2200 Wireless Setting

General

To connect the NC-2200w to your wireless network, follow the steps in the Quick Setup Guide.

■If you have already used the NC-2200w on another network, re

initialize the NC-2200w to its factory default settings.

■The NC-2200w cannot be used with a USB HUB.

■Only use the supplied AC adapter.

■Only connect Brother Printer/MFC/DCP to the NC-2200w USB port.

■Do not disconnect the USB cable while setting up, printing or scanning.

TCP/IP functions

After completed the wireless setup for NC-2200w, following TCP/IP functionalities are available. You must have a valid IP address programmed into the NC-2200w and your computer to use TCP/IP functionalities except for the address setting protocols such as DHCP/BOOTP/RARP and APIPA.

DHCP/BOOTP/RARP

By using the DHCP/BOOTP/RARP protocols, the IP address can be automatically configured.

To use the DHCP/BOOTP/RARP functions, please contact your network administrator.

NC-2200W WIRELESS SETTING 2 - 1