Wireless Setup Problems
The NC-2200w is not found while setup by the Wireless Setup Wizard
Make sure that the Link LED is turned on. If the Link LED is not turned on, Brother NC-2200w may not work properly. Check the following:
1Check if the Brother NC-2200w power is turned on.
2Check if the Brother NC-2200w is securely connected to the Brother Printer/MFC/DCP and the Printer/MFC/DCP is powered on.
3Move your PC closer to the Brother Printer/MFC/DCP with the NC-220w installed and try gain
4Reset the NC-2200w back to the default setting and try again. For the information how to reset to the factory default setting, see Test Button on page 1-4.
Before you configure the NC-2200w, you need to temporarily change your computer’s wireless settings to communicate with the un- configured NC-2200w. Check following:
1Check if the wireless settings of your computer are as follows.
■Communication mode: Ad-hoc (channel 11)
■Network name (SSID/ESSID): SETUP (case sensitive)
2If you are using Windows® XP or Mac OS® X 10.2.4-10.3 or greater, and the Ad-hoc network “SETUP” doesn’t appear in the
available network list of the wireless setup utility of the Windows® XP or Mac OS® X, you may be able to resolve this problem by manually adding the Ad-hoc network using the following procedure.