4You can see the Network name (SSID/ESSID) of the NC-2200w in the Available wireless networks box. Select SETUP and check the Allow me to connect... check box. Click the Connect button.

5Check the wireless network connection status. It may take a few minutes to change from 0.0.0.0 to 169.254.x.x IP address to be shown on screen. (where x.x are numbers between 0 and 255).

If the Network name (SSID/ESSID) you want to choose is not listed, try the following:

■Unplug the AC adapter, plug it back in again and then wait for a few minutes.

■Move your Brother Printer/MFC/DCP with the NC-2200w installed closer to your computer and try again.

■Reset the NC-2200w back to its default factory settings and try again. For the information how to reset to the factory default setting see Test Button on page 1-4.

■Refer to Chapter 6 of the NC-2200w Network User’s Guide on the CD-ROM we have supplied with the NC-2200w.

NC-2200W WIRELESS SETTING 2 - 11