Appendix B

Reloading firmware using BRAdmin Professional Utility

General

The firmware on the NC-2200w is stored in flash memory. This means that you can upgrade the firmware by downloading the appropriate update file. To get the latest firmware update, visit the Brother Solutions web site at http://solutions.brother.com/

Some software versions that we provide will automatically factory reset your print server parameters. We try to avoid doing this. However, if we add a significant new feature to our NC-2200w, it can result in the print server being factory reset.

Because of this, we STRONGLY recommend that you make a note of the current print server configuration before you upgrade. To do this, print out a Network configuration page. To learn how to print the Network Configuration Page, see Test Button on page 1-4.

Reloading firmware

1Select the appropriate device on the list.

2Select Load Firmware from Control.

3Enter the Firmware File name and the password and then click Load. Reloading process will start.

4Status LED of the NC-2200w blinks. Don’t turn off the NC- 2200w power switch until the NC-2200w returns to ready. Only Link LED lights when the NC-2200w returns to ready.

APPENDIX A - 3