Printing Problem
Print Job is not printed
Make sure the status and configuration of the NC-2200w and the Printer/MFC/DCP, check following:
1Check if the Brother NC-2200w power is turned on
2Check if the Brother NC-2200w is securely connected to the Brother Printer/MFC/DCP and the Printer/MFC/DCP is powered on.
3Make sure the printer/MFC/DCP is on-line and ready to print.
4Move your PC closer to the Brother Printer/MFC/DCP with the NC-220w installed and try gain
5Print the Network configuration page of the NC-2200w and check if the settings such as wireless and IP address settings are correct for your network. The problem may be the result of mismatched wireless setting, or mismatched or duplicate IP address. Verify that the Wireless settings and the IP address are correctly loaded into the NC-2200w. And make sure that no other nodes on the network have this IP address.
6Try pinging the NC-2200w from the host operating system command prompt with the command:
ping ipaddress
Where the ipaddress is the NC-2200w IP address (note that in some instances it can take up to a few minutes for the NC- 2200w to load its IP address after setting the IP address or powered on).