UNIX PRINTING 1 - 11
NC9100h_FM6.0
SCO UNIX requires TCP/IP V1.2 or later to work with Brother print
servers. You must first configure the /etc/hosts and /etc/
printcap files as described in step 2. Then run the sysadmsh
program as follows:
1
Select Printers.
2
Select Configure.
3
Select Add.
4
Enter the name of the print queue you entered in the /etc/
printcap file as the Printer name.
5
Enter anything as the Comment, and Class name.
6
For the Use printer interface select Existing.
7
Press the F3 key to get a list of available interfaces, and select
the desired one as the Name of interface using the cursor keys
(Dumb is a good choice).
8
Select Direct as the Connection.
9
Enter the desired Device name (/dev/lp generally works).
10
Select Hardwired as the Device.
11
Select No for the Require banner field.
Older SCO Unix Systems
The Brother NC-9100h Print/Fax servers support the FTP protocol.
Earlier SCO Unix systems are often configured to print using the FTP
protocol.
IBM AS/400
To use a Brother Print/Fax server with an IBM AS/400 running IBM's
TCP/IP gateways services for OS/400 (the OS/400 system must be
v3.1 or later)
Use the CFGTCP command at your OS/400 prompt to add the Print/
Fax server's TCP/IP address to the AS/400 host table.