10 - 20 FRONT PANEL SETUP MENU
Running H/F 4
3
Press Set.
4
Press Stop/Exit.
DLC/LLC
1
Press Menu, 6, 6, 4.
2
Press or to select On or Off.
3
Press Set.
4
Press Stop/Exit.
Net BIOS/IP
The NC-9100h Print / Fax Server supports SMB (Server Message
Block) over the TCP/IP protocol via the NetBIOS interface. This
means that just like regular Windows® PC's the machine can appear
in your network neighborhood. The main advantage of NetBIOS
printing is that you are able to print from legacy DOS applications that
are running on PC’s that are connected to Microsoft networks.
1
Press Menu, 6, 6, 5.
2
Press or to select On or Off.
3
Press Set.
4
Press Stop/Exit.
Ethernet
Ethernet link mode. Auto allows the print server to operate in
100BaseTX full or half duplex, or in 10BaseT half duplex mode by
auto negotiation.
100BaseTX Full Duplex (100B-FD) or Half Duplex (100B-HD) and
10BaseT Full Duplex (10B-FD) or Half Duplex (10B-HD) fix the print
server link mode. This change is valid after the print server has been
reset.
If you incorrectly set this value, you may not be able to
communicate with your print server.