Brother NC9100H

5 - 7 CONFIGURING INTERNET PRINTING FOR WINDOWS®

NC9100h_FM6.0

You will then be asked to enter the port settings for the remote

Print/Fax server:

Enter any unique legal Internet E-mail address for the remote

Print/Fax server (for example emailprinter@xyz.com). Note that

Internet E-mail addresses cannot have spaces in them.

Enter your E-mail address and the IP address of your SMTP

E-mail server (consult your network administrator if you do not

know this address). Also specify if you are going to use the

Partial E-mail Print option and the Notification type.

Press OK to continue. You will then be asked to re-start your

computer.

Once your computer has re-started you must create a printer on

your Windows® 95/98/Me/2000/XP and Windows NT®4.0

system using the standard Windows® 95/98/Me/2000/XP and

Windows NT®4.0 printer setup procedure. To do this, go the

Start button, select Settings and then Printers (Windows® 95/

98/Me/2000/XP and Windows NT®4.0). To do this, go to the

Control Panel, select Printers and Other Hardware and then

Printers and Faxes (or Add a printer)(Windows® XP)

Select Add Printer to begin the printer installation.

Click Next when you get the Add Printer Wizard window.

Select Local Printer when you are asked how the printers are

connected to your computer and push Next.

Select Local Printer, and then delete the check mark in Plug

and Play check box.

Select Local Printer attached to this computer.