Brother PC 8500 manual Power Supply, Insert the plug into a wall outlet

POWER SUPPLY

WARNING

–When leaving the machine unattended or when it is not being used, turn off the main power switch of the machine or remove the plug from the wall outlet.

CAUTION

–Do not use this sewing machine with extension cords or multi-plug adaptors, otherwise a fire or an electric shock may occur.

–Do not remove the plug from the wall outlet with wet hands, otherwise an electric shock may occur.

–When unplugging the power cord, turn off the main power switch of the machine, then grasp the plug and pull to unplug the cord. Pulling on the cord may damage it or cause a fire or an electric shock.

–Do not allow the power cord to be cut, damaged, modified, forcefully bent, pulled, twisted or bundled. In addition, do not place heavy objects on the cord or subject it to heat, otherwise the cord may be damaged or a fire or an electric shock may occur.

If the power cord or plug are damaged, contact your nearest authorized Brother dealer or service center.

–If the machine is not to be used for a long period of time, unplug the power cord, otherwise a fire may occur.

Setting Up
Sewing
Stitches	Utility
Stitches	Decorative	and	Characters
Embroidering
Patterns	Embroidery	Editing

1

1. Insert the plug into a wall outlet.

1Main power switch

2.Set the main power switch to “I ”.

3.To turn off the machine, set the main power switch to “O ”.

Retrieving
Stitch TM	Custom	My
Maintenance
Messages	Error
shooting	Trouble
Chart	Sewing
in Machine)	(Programmed	Patterns
Card)	(Memory	Patterns

9