Brother PC 8500 manual Trial Sewing, Sewing by using Utility Stitch

1. SEWING

TRIAL SEWING

Sewing by using “UTILITY STITCH”

CHAPTER 2

Setting Up Sewing

		CAUTION
		– Be aware of the needle at all
6	1	times while sewing, and keep
		your hands away from all
	3	moving parts such as the
		needle, balance wheel and
6*		thread take-up lever, otherwise
	5 4	injury may result.
		– Do not pull or push the fabric
		too hard while sewing, otherwise
		injury may result.
	2	– Never use bent needles. Such
		needles can easily break, which
		could result in injury.

Stitches	Utility
Stitches	Decorative	and	Characters
Embroidering
Patterns	Embroidery	Editing

1	2	3 4
		5
		6
		7
		8
9	0	A

A 75/11 needle is inserted into the machine at the factory.

1.When the machine is turned on, the straight stitch (left) is always selected.

1Replace with the presser foot with the letter indicated.

2 This indicates the pattern being selected.

3 If you touch this key before sewing, reverse stitches (reinforcement stitches) will be sewn automatically. (Refer to page 38.)

4 If you touch this key before sewing, the thread will be automatically cut at the finish of sewing. (Refer to page 39.)

5 An advice screen will appear if you touch this key while sewing. (Refer to page 42.)

6 This selects the appropriate pattern for the sewing application and also displays the operation steps. (Refer to page 40.)

7 Touch this key to return to the previous page.

8 Touch this key to move to the next page.

9 Touch these keys to adjust the stitch width setting. 0 Touch these keys to adjust the stitch length setting. A Touch these keys to change the thread tension.

Retrieving
Stitch TM	Custom	My
Maintenance
Messages	Error
shooting	Trouble
Chart	Sewing
in Machine)	(Programmed	Patterns
Card)	(Memory	Patterns

36