Brother PC 8500 manual Button Sewing, This stitch is used for attaching buttons

BUTTON SEWING M

This stitch is used for attaching buttons.

Do not use the automatic thread cutter when attaching buttons, (the threads will become difficult to handle and tying off will not be possible).

Setting Up Sewing

1. Raise the presser foot lever and slide the feed dog	Utility Stitches
adjustment lever to the right to lower the feed dog.

64

1Feed dog adjustment lever

2.Attach button fitting foot “M”, place the button into the presser foot and then lower the presser foot.

3.Turn the balance wheel to check that the needle goes into each of the holes in the button correctly, and then start sewing. Once sewing is completed, the machine will stop automatically.

*If extra attachment strength is needed, carry out the button sewing operation twice.

4.Once sewing is completed, return the feed dog to its original position, pull the bobbin thread at the sewing end down and pull the upper thread at the sewing end through to the reverse side of the fabric. Then tie the thread ends together and cut the threads at the sewing start.

Stitches	Decorative	Characters and
Embroidering
Patterns	Embroidery	Editing
Retrieving
Stitch TM	Custom	My
Maintenance
Messages	Error
shooting	Trouble
Chart	Sewing
in Machine)	(Programmed	Patterns
Card)	(Memory	Patterns