Dealer Bent, Thread Embroidering Short Begins

Symptom	Probable Cause	Remedy	Reference Page
		If the thread tension cannot be
	The thread tension does not	adjusted, thread wax and dust
	The thread tension does not	may have collected in the upper
	correspond to the amount that	may have collected in the upper
	correspond to the amount that	or middle thread guide plates,
	the thread tension knob was	or middle thread guide plates,
	the thread tension knob was	causing the thread tension guide
	tightened.	causing the thread tension guide
	tightened.	plates to rise. Clean the thread
There are loops in		plates to rise. Clean the thread
There are loops in		tension guide plates.
the upper thread.
the upper thread.		Try sewing with different thread.
		Try sewing with different thread.
		If the problem no longer occurs
	The thread quality is poor.	after the thread is changed, the
	The thread quality is poor.	thread quality is the problem.
		thread quality is the problem.
		Replace the thread with one of
		good quality.
	Lint may be wound in the hook.	Clean the hook.	p.193

	The upper thread is not threaded	Check the thread path, and then	p.35
	correctly.	thread the upper thread again.	p.35
The machine is	correctly.	thread the upper thread again.
The machine is		Replace the hook.
noisy.	The hook is damaged.	Replace the hook.
	The hook is damaged.	Consult your nearest authorized
		dealer.
	Not enough oil was applied.	Oil recommended parts.	p.196

		Touch the key to move the
	The needle is not at the correct	desired needle bar to be	p.40
	position.	threaded into embroidering	p.40
	position.	threaded into embroidering
		position.

The needle	Recommended needles are not	Replace and use recommended	p.15, 63
threader cannot	used on this machine.	needle.
be used.	The needle is not installed	Correctly install the needle.	p.15, 63
	correctly.	Correctly install the needle.	p.15, 63
	correctly.
	The hook on the automatic	Consult your nearest authorized
	needle-threading mechanism is	Consult your nearest authorized	p.15, 63
	needle-threading mechanism is	dealer.	p.15, 63
	bent.	dealer.
	bent.
	The upper thread is not threaded	Check the thread path, and then	p.35
	correctly.	thread the upper thread again.	p.35
The thread	correctly.	thread the upper thread again.
The thread	The bobbin thread is not	Correctly thread the bobbin
tension is	The bobbin thread is not	Correctly thread the bobbin	p.19
tension is	correctly threaded.	thread.	p.19
incorrect.	correctly threaded.	thread.

	The lower thread tension is	Adjust the tension of the bobbin	p.85
	The lower thread tension is	Adjust the tension of the bobbin
	incorrect.	thread.
	incorrect.	thread.
The upper thread	If a short length of thread	Set the remaining length of
comes out of the	remains after the thread is	Set the remaining length of
comes out of the	remains after the thread is	thread to “LONG TAIL” on the
needle when	trimmed, the needle may	thread to “LONG TAIL” on the	p.150
needle when	trimmed, the needle may	second page of the settings	p.150
embroidering	become unthreaded when	second page of the settings
embroidering	become unthreaded when	screen.
begins.	embroidering begins again.	screen.
begins.	embroidering begins again.

The upper thread	There is no more thread in the			7
does not reach the	bobbin, the thread does not feed
bobbin thread	from the bobbin, or the thread	Correctly thread the lower	p.19
when	that is fed from the bobbin is too	thread.	p.19
when	that is fed from the bobbin is too	thread.
embroidering	short.
begins.

Troubleshooting 205

PE-600II specifications

The Brother PE-600II is a state-of-the-art embroidery machine that caters to both novice and experienced embroiderers alike. This versatile machine combines user-friendly features with advanced technologies, making it a popular choice among crafting enthusiasts. One of its standout characteristics is the expansive 4" x 4" embroidery area, which provides ample space for a variety of designs and projects, from simple monograms to intricate images.

Equipped with a vibrant 4.5" color touchscreen display, the PE-600II allows users to easily navigate through functions and select designs with just a few taps. The intuitive interface enhances user experience, making it easier for beginners to familiarize themselves with the machine's features. Users can choose from a library of built-in designs, fonts, and frames, offering over 100 embroidery designs and 10 built-in fonts for personalization. This extensive selection helps users customize projects to better suit their preferences.

The PE-600II utilizes advanced Brother technology, including a high-quality needle threading system that automatically threads the needle with just the push of a button, minimizing frustration and ensuring that users spend more time embroidering and less time setting up. Moreover, its quick-set bobbin feature allows for easy installation, further streamlining the embroidery process.

One of the exceptional features of the Brother PE-600II is its compatibility with various embroidery formats. This flexibility enables users to import designs from multiple sources, offering vast creative potential. The machine also supports USB connectivity, making it easy to transfer designs from a computer or USB drive directly to the embroidery machine.

Additionally, the PE-600II incorporates features such as automatic thread trimming, allowing users to cut excess threads automatically, thus enhancing efficiency and providing a clean finish to projects. The LED-lit work area offers excellent visibility, ensuring precision even in low-light conditions.

With its robust construction, the Brother PE-600II is built to last, making it a valuable addition to any crafter's toolkit. The combination of essential features, innovative technology, and ease of use makes this machine an exceptional choice for anyone looking to explore the world of machine embroidery. Whether working on personal projects or small business endeavors, the Brother PE-600II is designed to inspire creativity and deliver beautiful, professional results.

Brother PE-600II operation manual Dealer Bent, Thread Embroidering Short Begins

Models: PE-600II

Symptom

dealer.

bent.

screen.

when

thread.

embroidering

short.

begins.

Troubleshooting 205

PE-600II specifications