Brother PE-600II operation manual 208

APPENDIX —————————————————————————————————————————————————————

Sewing cannot begin from the specified starting position. Change the starting position or move the frame and change the embroidering position. (Refer to page 89.)

The needle bar case cannot be moved to its initial position.

Touch to automatically

reset the needle bar case.

The automatic needle-thread- ing mechanism did not operate correctly.

The thread is entangled in the automatic needle-threading mechanism, remove the thread,

and then touch .

The pattern is too large. Patterns larger than 200 mm (H)

×300 mm (W) (7-7/8 inches (H)

×11-3/4 inches (W)) cannot be used. Reduce the pattern to a size smaller than that specified.

The needle has stopped at an incorrect position.

Turn the handwheel so that the mark on the handwheel is at the top.

The needle bar case has stopped at an incorrect posi- tion.

Touch to automatically

reset the needle bar case.

Another operation was per- formed while the automatic needle-threading mechanism was threading the needle.

Press the automatic needle threading button, and then per- form the other operation after the needle is threaded. (Refer to page 39.)

The memory capacity is exceeded to the limit. Delete another data and try again.

More than 101 patterns are being combined.

Reduce the number of patterns combined. Up to 101 patterns can be combined.

The needle bar case motor is locked.

Touch to automatically

reset the needle bar case.

The USB media's memory capacity is exceeded to the limit.

There are too many data either in the machine or USB media.

The thread picker did not oper- ate correctly.

The thread is entangled on the thread picker, remove the thread.

208