Chapter 3
Defining Internal Font Settings
1
2
3
4
5
1Extended Characters
Available settings: [Italic], [Graphics]
Default setting: [Graphics]
This parameter determines which characters are used when printing ASCII characters 128 to 255. When [Italic] is selected, italic versions of ASCII characters 32 to 127 are used. When [Graphics] is selected, the characters shown in the table on page 55 are used.
2Character Set Map
Available settings: [USA], [France],
[Germany], [United Kingdom], [Denmark I], [Sweden], [Italy], [Spain I], [Japan], [Norway], [Denmark II], [Spain II], [Latin America], [Korea], [Legal]
Default setting: [USA]
This parameter determines which character set is used, allowing you to print special characters appropriate for the language selected. See the table on page 56 for details.
3Default Font
Available settings: [Serif], [Sans Serif]
Default setting: [Serif]
This parameter determines which
4Reduce Character Size
Available settings: [Disable], [Enable]
Default setting: [Disable]
This parameter determines whether text is printed at a reduced size. The actual size of the text depends on the setting selected for [Default Pitch], as shown below.
Default Pitch | Reduced Size |
10 characters/inch | 16.67 characters/inch |
|
|
12 characters/inch | 20 characters/inch |
|
|
Proportional | Half the character |
| width |
|
|
15 characters/inch | Does not change |
|
|
5Character Attribute
Available settings: [Bold], [Double Width], [Underline]
This parameter determines the attributes used for printed text.
36