Clearing a Paper Jam

If paper becomes jammed, remove the paper according to the following procedure.

a Press and hold the (Feed) button.

The drive motor will start and move slowly for a few seconds, then move faster as long as you hold the button down. This can be repeated as many times as necessary.

If this does not eject the jammed paper, continue to the next step.

b Gently open the release cover completely.

c Gently pull the paper out of the printer in either direction.

Using the Printer

d Close the release cover.

e Insert a new sheet of paper and print again.

Cutting Roll Paper

2

Roll paper can be cut using the printer’s tear bar. Pull one edge of the ejected paper up and toward the other edge diagonally.

The tear bar is sharp. To avoid injury, do not touch the tear bar.

25