Brother PT-1700 Inserting Batteries, To insert batteries, Alkaline batteries are recommended

Models: PT-1700

1 82
Download 82 pages 37.46 Kb
Page 9
Image 9
INSERTING BATTERIES

INSERTING BATTERIES

The machine uses six “AA” size (AM3, LR6, SUM-3, R6) batteries.

To insert batteries:

(1)Turn the machine over. Remove the battery compartment cover by pinching the latch and lifting.

(2)Follow the diagrams on the back of the compartment to insert the batteries in the proper direction.

(3)After inserting the batteries, re-fit the battery compartment cover.

When “BATT” (Batteries Weak) is displayed, replace the six batteries.

Alkaline batteries are recommended.

An optional AC Adaptor is available. (Model AD-30:7V, 1.2A)

Note:

When replacing batteries, do so in three minutes or less. Otherwise, unless an optional AC Adaptor is attached, any message in the work- ing area or Phrase Memory will be lost.

Note the following details when 1.2 V rechargeable NiCd batteries are used in this machine.

(1)“BATT” will not appear on the display when the rechargeable batteries are weak or empty. Instead, the power will turn off.

(2)Even after the batteries are recharged, the characters may not be printed clearly as a result of a low recharging efficiency or the operating conditions.

-7-

Page 9
Image 9
Brother PT-1700 manual Inserting Batteries, To insert batteries, Alkaline batteries are recommended