INSERTING
Sometimes you may want to insert a character into the middle of your message. To do so, you must change from Overtype Mode to Insert Mode.
To insert characters:
(1)Hold down the CODE key and press the INSERT key until display shows “I : 
”.
(2)Move the cursor to the position where you want to insert.
(3)Press the keyboard character or symbol you want to add (see SYMBOLS).
All characters following the insertion will move one space to the right.
Example | To insert a period into the message, changing it to “J. SMITH”: |
| ● Position the cursor under the “S”. |
J
A A A A A
S M I T
H
CAPS STL | UNDL/FRM |
| INSERT |
● Enter Insert Mode by pressing | CODE + 6¢ . |
●The following display appears.
A A A A A
| I : | ⋅ |
|
|
|
|
|
| CAPS STL | UNDL/FRM | |
INSERT |
|
| |
● Pressing the 6¢ | key while holding down the CODE key toggles | ||
between insert and overwrite mode.
