PRINT HEAD & ROLLERS
Occasionally, specks of dust or dirt become attached to the machine’s print head and rollers. This is particularly likely when you are using the unit outdoors or in a very dusty environ- ment. If a section of the print head is covered with dust, a blank horizontal streak may appear through the label text. Therefore, as with a tape recorder, the machine’s head may need to be cleaned from time to time.
To clean the print head and rollers:1Turn off the machine.
2Open the tape compartment cover, then remove the tape cassette if one is installed. The print head and rollers are located in the tape compartment.
3Print head: Use a dry cotton swab to gently wipe the print head with an
Rollers: Use a dry cotton swab to wipe each roller with an
4Install a tape cassette, close the tape compartment cover, and then try printing again.
5If dust still remains, repeat steps 3 and 4 using a cotton swab dipped in isopropyl (rubbing) alcohol.
If none of the above works, contact your service representative.
Print head | Print head |
Rollers | Cotton swab |
☞Cleaning can also be done by using the optional print head cleaning cassette (TZ- CL4).
8