Brother HPT007, PT-1760 Cause, Remedy, NO TAPE, NO FILES, TOO SMALL, Numbering, LINE LIMIT, INVAL. CHRS, MEMORY FULL, CUTTER ERROR, Error Message

Error Message	Cause	Remedy
CUTTER ERROR!	This message appears if the	Release the tape cutter lever.
	tape cutter lever is pressed
	down while a label is being
	printed.
INVAL. CHRS!	This message appears if the	Move the cursor below a
	cursor is not below a number	number before holding down
	when you hold down fand	f and press A.
	press A.
LINE LIMIT!	This message appears if the	Reduce the number of lines
	number of lines in the text is	or install a tape of greater
	greater than the maximum	width.
	number of lines possible for
	the installed tape.
MEMORY FULL!	This message appears if you try	Delete an unwanted file to
	to store a text file after 300	make room for the new one.
	characters have already been
	stored in the memory.
NO FILES!	This message appears if you try	Store a text file first.
	to recall or delete a text file
	from the memory when none
	are stored.
NO TAPE!	This message appears if you try	Install a tape cassette and try
	to print a label or feed the tape	again.
	when no tape cassette is
	installed.
TOO SMALL!	This message appears if the	Press the key of a number
	number that is set to be printed	that is greater than the
	using the Numbering function	number in the text.
	is less than the number above
	the cursor.

33