Brother HPT007, PT-1760 TAPE MARGIN FUNCTION, FEED:FULL, FEED:HALF, FULL, HALF, HALF, NARROW, EXAMPLE, Tape margin, To change the tape margin setting:

TAPE MARGIN FUNCTION

The Tape margin function allows you to adjust the size of the margins on the left and right sides of your text.

The default tape margin setting is FULL; however, three other settings are also available.

FULL

(1” (25 mm margins))

NONE

(1/12” (2 mm margins))

NARROW

(1/6” (4 mm margins))

HALF

(1/2” (12 mm margins))

☞After printing using the NARROW and HALF tape margin settings, push down on the tape cutter lever to cut off the label, then use scissors to cut along the printed dots (:) to center the text within the label.

To change the tape margin setting:

1While holding down f, press 6once, and keep fheld down to display the cur- rent tape margin setting.

2While still holding down f, continue pressing 6until the desired tape margin set- ting is displayed.

3Release fto apply the selected tape margin setting to the entire text.

EXAMPLE

To select the HALF tape margin setting:

1While holding down f, press 6

once, and keep f held down.

FEED:FULL

2 While still holding down f, continue

pressing 6until HALF is displayed.

3Release f.

FEED:HALF

23