SIZE FUNCTION
The character size can be adjusted using the Size function. The following table shows the character sizes.
SizeCharacterSIZE 1 Standard Size
SIZE 2 Double Width
SIZE 3 Double Height
SIZE 4 Double Width & Double Height
SIZE 5 4 ⋅ Width & Double Height
AUTO
1/4” (6 mm) tape: SIZE 1
3/8” to 3/4” (9 mm to 18 mm) tape: SIZE 4
The default size setting is AUTO. The currently selected size setting is always shown by the indicator above the display.
| SIZE 1 | SIZE 2 | SIZE 3 | SIZE 4 | SIZE 5 |
Sample
When 6 mm tape is installed and SIZE 3, 4 and 5 is set for horizontal printing or SIZE 2, 4 and 5 is set for vertical printing, the “CHR_SIZE:AUTO?” message will display. Press h to print in the AUTO size.
To change the size setting:1While holding down f, press 1 once, and keep f held down to display the current size setting.
2While still holding down f, continue pressing 1 until the desired size setting is displayed and is shown by the size indicator.
☞The current character size setting is also shown by the size indicator above the display.
3Release f to apply the selected size setting to the entire text.
17