For Windows®

1)Select which options to install.

Editor: The P-touch Editor Version 3.1 software

Clip Art: The illustrations for the P-touch

Editor Version 3.1 Clip Art function

Fonts: The 13 fonts

Auto Format

Templates: The templates for the Auto Format function

User’s Guide: The User’s Guide (HTML) for the P- touch Editor Version 3.1 (The User’s Guide can also be viewed from the CD-ROM.)

Help: The help files for P-touch Editor Version 3.1

If the Change button can be clicked while an option is selected, sub-components can be selected. Click the Change button to display the Select Sub-components dialog box, and then select the sub-components that you wish to install by putting a check mark beside them. If certain options or sub-components are not installed, some P-touch Editor functions may not be available. After selecting the desired sub-components, click the Continue button.

2) Click the Next button to begin installation.

9After P-touch Editor is installed, a dialog box appears, allowing you to select whether or not to install the printer driver.

To install the printer driver, click the Yes button. The first Driver Setup dialog box appears. Continue with the section Installing the printer driver.

If the printer driver is already installed, click the No button, restart the computer, and then remove the CD-ROM from the CD-ROM drive.

Installing the printer driver

For a serial connection

1Select “Serial cable”, and then click the OK button. A dialog box appears, allowing you to select whether to install or uninstall the printer driver.

2Select “Install”, and then click the Next button.

3For Windows® 95/98/Me users: Skip to step 4.

For Windows® NT 4.0/2000 Professional/XP users: A dialog box appears, allowing you to add a P-touch (PTCOM) port.

If a P-touch (PTCOM) port is already installed, click the Next button and continue with step 4 below.

If a P-touch (PTCOM) port is not already installed, click the Add button. The Port Name dialog box appears.

From the list of PTCOM ports, select the port where the PT-9200DX is connected (“PTCOM1:” if the PT- 9200DX is connected to the COM1 port, or “PTCOM2:” if the PT-9200DX is connected to the COM2 port), and then click the OK button. In the Driver Setup dialog box, click the Next button.

4A dialog box appears, allowing you to select the PTCOM port where the PT-9200DX is connected.

Select “PTCOM1:” if the PT-9200DX is connected to the

COM1 port, or “PTCOM2:” if the PT-9200DX is connected to the COM2 port, and then click the Next button. (On Windows® NT 4.0/2000 Professional/XP, select the port added in step 3.) A dialog box appears, asking for confirmation on how the installation will be carried out.

8