Monitoring the P-touch Status

You can determine the status of the PT-9200DX from the power button light.

PT-9200DX status

Power button light color

Description/Remedy

 

 

Lights up in green

• The P-touch is operating normally and is in stand-by.

 

 

Flashes in green

• The P-touch is receiving data from the computer correctly.

 

 

Lights up in orange

• While in stand-by, the P-touch detected that the tape cassette was not

 

inserted correctly. Correctly insert the tape cassette. Printing will be-

 

gin when the tape cassette is correctly inserted.

 

• The tape compartment cover is not completely closed. Close the tape

 

compartment cover.

 

 

Flashes in orange

• While receiving data, the P-touch detected that the tape compartment

 

cover was not completely closed or that the cover was opened. Close

 

the tape compartment cover. Printing will begin when the tape com-

 

partment cover is closed.

 

 

Flashes in red

• While printing, the P-touch detected that a tape cassette was not in-

(Correct the problem, and then try printing

serted or that the tape cassette ran out of tape. Insert a tape cassette or

again.)

replace it.

 

• Before or during printing, the tape compartment cover was opened.

 

Close the tape compartment cover.

 

• A data transmission error occurred. After about five seconds, the P-touch

 

will return to stand-by (the power button will light up in green).

 

 

Lights up in red

• Turn off the P-touch, and then turn it on again.

(Correct the problem, and then try printing

If the power button continues to light up in red, contact your service

again.)

representative.

 

 

28