Brother QC 1000 operation manual 106, Adjusting Patterns, APress Then press, Screen

SEWING STITCH PATTERNS

ePress the “Start/Stop” button to stop the machine, and then press the “Reverse/ Reinforcement Stitch” button to sew reinforcement stitches.

Memo

•When sewing character stitch patterns, the machine automatically sews reinforcement stitches at the end of the stitching, then stops (The machine is automatically set to sew reinforcement stitches at the beginning and end of each character.)

• After sewing is finished, trim any excess thread.

Note

When sewing some patterns, the needle will stop in the raised position while the fabric is fed due to the operation of the needle bar separation mechanism which is used in this machine. At such times, a clicking sound different from the sound generated during sewing will be heard. This sound is normal and is not the sign of a malfunction.

Adjusting Patterns

Depending on the type and thickness of the fabric being sewn, the sewing speed, whether or not stabilizer material is used, etc., the desired result may not be

achieved. If this occurs, press , and then perform

the following adjustment using the same sewing conditions as those used for your project. If the pattern

is still misaligned after making adjustments with

selected, adjust each pattern separately.

aPress	, and then press	on P. 6 of
the screen.

bAttachpattern.presser foot “N”, and then sew the

cCompare the sewn pattern with the following illustration.

106