Brother QC 1000 Eyelets, Attaching a 4-Hole Button, Attaching a Button with a Shank

SEWING THE STITCHES

■Attaching a 4-Hole Button

Sew the two holes toward the front. Then, raise the presser foot, move the fabric so that the needle goes into the back two holes, and then sew them in the same way.

■Attaching a Button with a Shank

aPull the shank lever toward you.

bWhen sewing is finished, pull the two ends of the upper thread between the button and the fabric, wind them around the shank, and then tie them together.

cTie the ends of the bobbin thread together at the beginning and end of the stitching on the wrong side of the fabric

3

a

aShank lever

Eyelets

Eyelets can be used for making belt holes and other similar applications.

Stitch		Presser		Stitch width		Stitch length			Twin
	Stitch Name		Applications	[mm (inch)]			[mm (inch)]
Key		Foot							Needle
				Auto	Manual	Auto		Manual
	Eyelet		For making eyelets, holes on	7.0	7.0 6.0 5.0	7.0		7.0 6.0 5.0
			belts, etc.						NO
				(1/4)	(1/4 15/64 3/16)	(1/4)		(1/4 15/64 3/16)

Utility Stitches

aPress , and then attach presser foot “N”.

bPress or in the width display or

or in the length display to set the size of the eyelet.

cLower the needle into the fabric at the beginning of the stitching, lower the presser foot lever, and then start sewing.

*Reinforcement stitches are automatically sewn at the end of the stitching.

*If the automatic thread cutting setting is selected before sewing, the machine will automatically cut the thread at the end of stitching.

7 mm 6 mm 5 mm

a

a Starting point of stitching

95