KNOWING YOUR SEWING MACHINE —————————————————————————————————————————

1KNOWING YOUR SEWING MACHINE

NAMES OF MACHINE PARTS AND THEIR FUNCTIONS

The main parts

aButtonhole fine-adjusting screw (page 32)

Turn the buttonhole fine-adjusting screw to adjust buttonhole stitching when it is not uniform.

bPattern selection dial (page 22)

Turn the pattern selection dial to select the number of the stitch that you want to use.

cThread take-up lever (page 13)

dUpper tension control dial (page 24)

This controls the tension of the upper thread.

eFlat bed attachment with accessory storage (page 6 and 26)

fReverse sewing lever (page 23)

Press and hold down the reverse sewing lever to sew in the opposite direction.

gBuilt-in handle

hSpool pin (page 10 and 13)

The spool pin holds the spool of thread.

iBobbin winder (page 10)

The bobbin winder winds thread onto the bobbin for use as the lower thread.

jHandwheel

Use the handwheel to manually raise and lower the needle.

kMain power/sewing light switch (page 8)

Use this switch to turn on and off the main power and sewing light.

lFoot controller jack/jack

Insert the foot controller plug into the foot controller jack, which also supplies power to this machine.

mThread cutter (page 23)

Pass the threads through the thread cutter to cut them.

nPresser foot lever (page 13)

Use the presser foot lever to raise and lower the presser foot.

oBobbin winding pre-tension disc/thread guide (page 10 and 13)

The thread guide/bobbin winding pre-tension disc is used when winding the thread onto the bobbin and threading the machine.

pFoot controller (page 9)

Use the foot controller to control the sewing speed and to start and stop sewing.

Part code;

XC7359-021 (110/120V Area), XC7438-321 (220/240V Area), XC7456-321 (U.K.), XE0629-001 (Australia, New Zealand), XD0852-021 (Korea), XC7438-321 (Russia), XD0115-121(Argentina), XE3414-001(Brazil(120V)), XE4302-001(Brazil(220V)),XE3447-001(Taiwan)

5