Needle and presser foot section
Flat bed attachment
The accessories are stored in a compartment inside the flat bed attachment.
a Presser foot holder assembly |
The presser foot is installed onto the presser foot holder |
assembly. |
aLift the bottom of the flat bed attachment toward you, and then pull the flat bed attachment out to remove it.
aFlat bed attachment
bStorage compartment
Note
1
b Presser foot screw |
Use the presser foot screw to hold the presser foot |
holder assembly in place. |
c Presser foot (Zigzag) |
The presser foot applies pressure consistently on the |
fabric as the sewing takes place. Attach the appropriate |
presser foot for the selected stitching. |
d Feed dogs |
The feed dogs feed the fabric in the sewing direction. |
e Needle plate |
The needle plate is marked with guides for sewing |
straight seams. |
f Shuttle hook |
g Shuttle cover |
Open the shuttle cover to set the bobbin. |
h Bobbin case |
i Needle |
j Needle bar thread guide |
k Needle clamp screw |
Use the needle clamp screw to hold the needle in place. |
●Put the accessories in the bag, and then store the bag inside the compartment. If the accessories are not in a bag, they may fall out, and be lost or damaged.
6