Bryant 213A warranty Physical Data, Vapor Line Sizing And Cooling Capacity Loss

PHYSICAL DATA

UNIT SIZE SERIES	018---A	024---A	030---A		036---A	042---A	048---A	060---A
Operating Weight (lb)	146	162	203		207	246	263	279
Shipping Weight (lb)	169	189	235		239	278	293	311
Compressor Type					Scroll
REFRIGERANT				Puron→ (R--- 410A)
Control			TXV (Puron Hard Shutoff)
Charge (lb)	5.25	5.9	7.6		7.65	8.4	11.75	12.35
COND FAN			Propeller Type, Direct Drive
Air Discharge					Vertical
Air Qty. (CFM)	2196	2614	2614		3365	3810	4046	4046
Motor HP	1/10	1/10	1/10		1/4	1/5	1/5	1/5
Motor RPM	1100	1100	1100		1100	800	800	800
COND COIL
Face Area (Sq. ft.)	13.13	15.09	25.87		25.87	25.15	20.12	22.63
Fins per In.	25	20	20		20	20	20	20
Rows	1	1	1		1	1	2	2
Circuits	4	5	6		6	6	8	8
VALVE CONNECT. (In. ID)
Vapor	5/8	5/8	3/4		3/4	7/8	7/8	7/8
Liquid				3/8
REFRIGERANT TUBES* (In. OD)
Vapor (0---80 ft. Tube Length)	5/8	5/8	3/4		3/4	7/8	7/8	1--- 1/8
Liquid (0---80 ft. Tube Length)				3/8

*For tubing sets between 80 and 200 ft. horizontal or 20 ft. vertical differential, consult the Longline Guideline. Note: See unit Installation Instruction for proper installation.

VAPOR LINE SIZING AND COOLING CAPACITY LOSS

PURON 1-STAGE HEAT PUMP APPLICATIONS

LONG LINE APPLICATION: An application is considered					is above indoor unit, and 80 ft. when the outdoor unit is below
”Long line” when the total equivalent tubing length exceeds 80					the indoor unit. Refer to Accessory Usage Guideline below for
ft. or when there is more than 20 ft. vertical separation between					required accessories. See Longline Application Guideline for
indoor and outdoor units. These applications require additional					required piping and system modifications. Also, refer to the table
accessories and system modifications for reliable system					below for the acceptable vapor tube diameters based on the total
operation. The maximum allowable total equivalent length is 250					length to minimize the cooling capacity loss.
ft. The maximum vertical separation is 200 ft. when outdoor unit
	Acceptable			Cooling Capacity Loss (%)Total Equivalent Line Length (ft.)
Unit Nominal Size (Btuh)	Vapor Line
		Standard Application					Long Line Application Requires Accessories
	Diameters
	(In. OD)	25	50	80	80+	100	125	150	175	200	225	250
18000	1/2	1	2	3	3	4	6	7	8	9	10	12
1---Stage Puron HP	5/8	0	0	1	1	1	1	2	2	3	3	3
24000	5/8	0	1	1	1	2	3	3	4	4	5	6
1---Stage Puron HP	3/4	0	0	0	0	0	1	1	1	1	1	2
30000	5/8	1	2	3	3	3	4	5	6	7	8	9
	3/4	0	0	1	1	1	1	2	2	2	3	3
1---Stage Puron HP
	7/8	0	0	0	0	0	1	1	1	1	1	1
36000	5/8	1	2	4	4	5	6	7	9	10	11	13
	3/4	0	0	1	1	1	2	2	3	3	4	4
1---Stage Puron HP
	7/8	0	0	0	0	0	1	1	1	1	2	2
42000	3/4	0	1	2	2	2	3	4	4	5	6	6
1---Stage Puron HP	7/8	0	0	1	1	1	1	2	2	2	3	3
48000	3/4	0	1	2	2	3	4	5	5	6	7	8
1---Stage Puron HP	7/8	0	0	1	1	1	2	2	2	3	3	4
60000	3/4	1	2	4	4	5	6	7	9	10	11	12
	7/8	0	1	2	2	2	3	4	4	5	5	6
1---Stage Puron HP
	1 1/8	0	0	0	0	1	1	1	1	1	1	2

Standard Length = 80 ft. or less total equivalent length

Applications in this area are long line. Accessories are required as shown recommended on Long Line Application Guidelines

Applications in this area may have height restrictions that limit allowable total equivalent length, when outdoor unit is below indoor unit See Long Line Application Guidelines

213A

3