Check Out of Flame Failure Safety Device

1.To verify operation of the flame failure safety device, start the refrigerator in the gas mode (refer to lighting instructions on page 6) and verify the presence of a flame.

2.Turn off the gas at the manual shut-off valve or at the main gas supply tank.

3.The flame will go out and within 3 minutes the

flame safety device will automatically close (an audible click will be heard as this device closes).

4.Turn the gas on at the manual shut-off valve.

5.Attempt to light the burner by placing the mode selection button to the gas mode. Do not push in the safety valve.

6.Without holding the safety valve in, the burner flame will not re-light. This indicates the flame failure safety device is functioning.

Description of Controls

A

B

C

E

G

 

 

 

 

D

F

Figure 7

The refrigerator’s operating controls are located on top of the refrigerator. The control panel is located on the top front surface directly above the refrigerator door.

(A) Safety Valve

The safety valve is designed so that any loss of flame will stop the gas flow to the burner. It is con- trolled by means of a thermocouple that is positioned in the flame. As long as a flame is detected by the thermocouple, the valve will remain open. Upon flame failure, the valve closes, shutting off the gas flow to the burner. During the gas ignition process, the safety valve button must be held in until a flame is established at the burner.

(B) Thermostat

The thermostat on the Norcold refrigerator controls both the gas and AC electric operations, thereby elimi- nating the necessity of resetting each time a different power source is selected. Rotate the thermostat knob clockwise to make the refrigerator cabinet colder.

(C) 120 Volts AC Operation

Pressing button (C) selects the AC mode of operation. When the AC mode is selected and AC voltage is supplied to the refrigerator, the refrigerator will operate on 120 volts AC.

(D) 12 Volts DC Operation

Pressing button (D) selects the DC mode of operation. When DC is selected and DC is available to the refrig- erator, the refrigerator will operate at full cooling power. The DC operation is a continuous run (no thermostat control) mode.

(E) Gas Operation

Pressing button (E) selects the Gas mode of opera- tion. The refrigerator is equipped with electronic igni- tion. When the gas mode is selected, the electronic ignition is energized and sparking is generated at the burner (Note: Push safety valve button in and hold until flame is present at burner). Sparking will con- tinue until a flame is present at the burner. When a flame is sensed by the electronic ignition module, the sparking ceases and the flame indicator (G) illumi- nates indicating the refrigerator is operating on gas.

(F) Off

Pressing button (F) will interrupt all power sources and cease operation of the refrigerator.

5

Page 5 Page 7
Page 6
Image 6
Bryant 3163 service manual Description of Controls
Page 5 Page 7

3163 specifications

Bryant 3163 is an advanced heating, ventilation, and air conditioning (HVAC) system that embodies the latest in HVAC technology and efficiency. Designed to meet the needs of modern homeowners, the Bryant 3163 offers a perfect blend of comfort, reliability, and energy savings.

One of the standout features of Bryant 3163 is its state-of-the-art variable-speed compressor. This technology allows the unit to adjust its output based on the specific demands of the environment, providing optimal comfort while minimizing energy consumption. Instead of running at a single, fixed speed like traditional systems, the variable-speed compressor can operate at different levels, ensuring a consistent and comfortable temperature throughout the home.

In addition to its impressive compressor, the Bryant 3163 is equipped with innovative multi-zone capabilities. This system allows homeowners to create separate climate zones within their homes, ensuring individualized comfort for different rooms or areas. This is particularly beneficial for larger homes where temperature preferences can vary widely between family members or activities in different areas.

The system also boasts an advanced air filtration system, which helps improve indoor air quality by capturing allergens, dust, and other airborne particles. The high-efficiency filters not only promote better health but also contribute to the overall efficiency of the HVAC system. Cleaner air means less strain on the system, leading to lower energy bills and an extended lifespan of the unit.

The Bryant 3163 incorporates smart technology, allowing homeowners to control their HVAC system remotely through smartphones or tablets. This feature enhances convenience, enabling users to adjust settings, monitor energy usage, and schedule maintenance with ease.

With a strong focus on energy efficiency, the Bryant 3163 meets stringent energy performance standards, qualifying for various efficiency rebates and incentives. Its quiet operation is another highlight, making it an ideal choice for residential environments where noise reduction is a priority.

In summary, the Bryant 3163 is a cutting-edge HVAC solution that excels in efficiency, comfort, and technology. With its variable-speed compressor, multi-zone capabilities, advanced air filtration, smart technology integration, and emphasis on energy savings, Bryant 3163 stands out as an excellent choice for homeowners seeking dependable climate control that prioritizes both comfort and efficiency.
Top Page Image Contents