Bryant 619E manual Standard Features and FIELD-INSTALLED Accessories, 619B,D

STANDARD FEATURES AND FIELD-INSTALLED ACCESSORIES

STANDARD FEATURE/FIELD-INSTALLED	HIGH WALL
	SYSTEMS
ACCESSORY
	(619B,D)
Internal Condensate Pump	A
Mounting Brackets	S
Microprocessor Controls	S
Cleanable Filters	S
3-Speed Indoor-Fan Motor	S
Automatic Indoor-Fan Speed Control	S
Extensive Diagnostics	S
Wireless Remote Controllers	S
Fully Insulated Indoor Unit Cabinet	S
Automatic Air Sweep	S
Auto. Restart Function	S
24-Hour Automatic Start/Stop Timer	S
Refrigerant Line Turn Elbow*	S
High- and Low-Voltage Terminal Blocks (Indoor)	S
AccuRater Refrigerant Metering Device	S²
Manual Defrost**	S
Demand Defrost**	S
Warm Start (in heating)**	S
Heating Operation to −20 F**	S
Auto. Changeover from Cooling to Heating**	S
Evaporator Coil Freeze Protection	S
Outdoor Low-Voltage Terminal Block	S
Accumulator	S
Crankcase Heater (Reciprocating Compressor Units)	S
Crankcase Heater (Scroll Compressor Units)	A
High-Pressure Switch*	S
Low-Pressure Switch*	S
5-Year Compressor Warranty	S
Compressor Start Assistance (non-scroll units)	S
Cycle-LOC™ Device*	S
Suction and Discharge Service Taps²²	S
Totally Enclosed Fan Motor	S
Acoustically-Lined Compressor Compartment	S
Winter Start Control*	A
Low Ambient Temperature Controls (down to −20 F)²	A
Time Guard Cycle Protector*	S
Liquid Solenoid Valve*	A
Condensing Unit Wall Mount Kit	A

LEGEND

AÐ Field-Installed Accessory S Ð Standard from the Factory

*For size 018 and larger. ²Not used on 38HDS systems. **Heat pump systems only.

²²The outdoor units are equipped with 4 taps; one for each service valve, and one each on compressor suction and discharge.

3