GT-PG (50YE) Series
GT-PG Design Features
The
Application Flexibility
•Eight Capacities 018, 024, 030, 036, 042, 048, 060 and 070.
•Extended range operation
•Vertical packages with either true right or true left return air options.
•Internally trapped condensate drain.
•Optional variable speed ECM fan motor adapts to various duct systems.
•Internal electric heat unit (optional) designed for easy field installation.
•Circuit breaker protected loop and hot water generator pumps.
•Field selectable low temperature protection setting for well or loop.
•Standard
Operating Efficiencies
•Puron®
•High efficiencies in AHRI/ISO/ASHRAE/ANSI
•
•Wide operating temperature range and high efficiency allow shorter loops.
•Optional hot water generator with internal pump generates hot water at considerable savings.
•Rugged and highly efficient next generation Copeland scroll compressors provide the extremely high efficiencies and capacities.
•Oversized coaxial tube
•Oversized
•Large low RPM blowers with optional variable speed fan motors provide quiet, efficient air movement with high static capability.
Service Advantages
•Removable panels - 3 for compressor, 2 for air handling compartment.
•Low profile control box grants easy access to all internal components.
•Factory installed liquid line filter/drier.
•Brass
•
•CXM control features status light with memory for easy diagnostics.
•Unit Performance Sentinel alerts homeowner of potential performance issues.
•Circuit breaker protected 75VA control transformer.
•Optional ECM motor includes control board with thermostat signal diagnostic LEDs, airflow display LED (100 CFM per flash), and simplified CFM selection.
•Insulated divider and separate air handling/compressor compartments permit service testing without air bypass.
•Fan motors have quick attach wiring harness for fast removal.
•Internal dropout blower for easy servicing.
•High and low pressure service ports on refrigerant circuit.
•Accurate refrigerant sensing low temperature protection.
Factory Quality
•All units are built on our Integrated Process Control Assembly System (IPCS).The IPCS is a unique state of the art manufacturing system that is designed to assure quality of the highest standards of any manufacturer in the
-Verifies that the correct components are being assembled.
-Automatically performs special leak tests on all joints.
-Conducts pressure tests.
-Performs highly detailed run test unparalleled in the HVAC industry.
-Automatically disables packaging for a “failed” unit.
-Creates computer database for future service analysis and diagnostics from run test results.
•All units are water
•Heavy gauge galvanized steel cabinets are epoxy powder coated for durable and
•All refrigerant brazing is done in a nitrogen atmosphere.
•All units are deep evacuated to less than 100 microns prior to refrigerant charging.
•All joints are both helium and halogen leak tested to insure annual leak rate of less than 1/4 ounce.
•Coaxial heat exchanger, refrigerant suction lines and all water lines are fully insulated to eliminate condensation problems in low temperature applications.
•Noise Reduction features include: double isolation mounted compressors; insulated compressor compartment; interior cabinet insulation using 1/2” coated glass fiber and optional variable speed fan.
•Safety features include: high pressure and loss of charge to protect the compressor; condensate overflow protection; low temperature protection sensors to safeguard the coaxial heat exchanger and air coil; hot water
Simplified Controls
•CXM solid state control module.
•‘CFM’ LED displays airflow (optional ECM motor).
•Dehumidification mode for higher latent cooling (optional ECM motor).
Bryant: Whatever it Takes. | ||
4 | ||
| ||
|
|